The SRFI-32 sort libraries -*- outline -*-
Olin Shivers
First draft: 1998/10/19
Last update: 2002/7/21
Emacs should display this document in outline mode. Say c-h m for
instructions on how to move through it by sections (e.g., c-c c-n, c-c c-p).
* Table of contents
-------------------
Abstract
Procedure index
Introduction
What's wrong with the current state of affairs?
Design rules
What vs. how
Consistency across function signatures
Data parameter first, less-than parameter after
Ordering, comparison functions & stability
All vector operations accept optional subrange parameters
Required vs. allowed side-effects
Procedure specification
Procedure naming and functionality
Types of parameters and return values
sort-lib - general sorting package
Algorithm-specific sorting packages
Algorithmic properties
Topics to be resolved during discussion phase
Porting and optimisation
References & Links
Acknowledgements
Copyright
* Abstract
----------
Current Scheme sorting packages are, every one of them, surprisingly bad. I've
designed the API for a full-featured sort toolkit, which I propose as an SRFI.
The spec comes with 1200 lines of high-quality reference code: tightly
written, highly commented, portable code, available for free. Implementors
want this code. It's better than what you have.
-------------------------------------------------------------------------------
* Procedure index
-----------------
list-sorted? vector-sorted?
list-merge vector-merge
list-sort vector-sort
list-stable-sort vector-stable-sort
list-delete-neighbor-dups vector-delete-neighbor-dups
list-merge! vector-merge!
list-sort! vector-sort!
list-stable-sort! vector-stable-sort!
list-delete-neighbor-dups! vector-delete-neighbor-dups!
heap-sort quick-sort insert-sort list-merge-sort vector-merge-sort
heap-sort! quick-sort! insert-sort! list-merge-sort! vector-merge-sort!
-------------------------------------------------------------------------------
* Introduction
--------------
As I'll detail bewlow, I wasn't very happy with the state of the Scheme
world for sorting and merging lists and vectors. So I have designed and
written a fairly comprehensive sorting & merging toolkit. It is
- very portable,
- much better code than what is currently in Elk, Gambit, Bigloo,
Scheme->C, MzScheme, RScheme, Scheme48, MIT Scheme, or slib, and
- priced to move: free code.
The package includes
- Vector insert sort (stable)
- Vector heap sort
- Vector quick sort (with median-of-3 pivot picking)
- Vector merge sort (stable)
- Pure and destructive list merge sort (stable)
- Stable vector and list merge
- Miscellaneous sort-related procedures: Vector and list merging,
sorted? predicates, vector binary search, vector and list
delete-equal-neighbor procedures.
- A general, non-algorithmic set of procedure names for general sorting
and merging.
Scheme programmers may want to adopt this package. I'd like Scheme
implementors to adopt this code and its API -- in fact, the code is a bribe to
make it easy for implementors to converge on the suggested API. I mean, you'd
really have to be a boor to take this free code I wrote and mutate its
interface over to your incompatible, unportable API, wouldn't you? But you
could, of course -- it's freely available. More in the spirit of the offering,
you could make this API available, and then also write a little module
providing your old interface that is defined in terms of this API. "Scheme
implementors," in this context, includes slib, which isn't really a standalone
implementation of Scheme, but is an influential collection of API's and code.
The code is tightly bummed. It is clearly written, and commented in my usual
voluminous style. This includes notes on porting and implementation-specific
optimisations.
-------------------------------------------------------------------------------
* What's wrong with the current state of affairs?
-------------------------------------------------
It's just amazing to me that in 2002, sorting and merging hasn't been
completely put to bed. These are well-understood algorithms, each of them well
under a page of code. The straightforward algorithms are basic, core stuff --
sophomore-level. But if you tour the major Scheme implementations out there on
the Net, you find badly written code that provides extremely spotty coverage
of the algorithm space. One implementation even has a buggy implementation
that has been in use for about 20 years!
Open source-code is a wonderful thing. In a couple of hours, I was able to
download and check the sources of 9 Scheme systems. Here are my notes from the
systems I checked. You can skip to the next section if you aren't morbidly
curious.
slib
sorted? vector-or-list <
merge list1 list2 <
merge! list1 list2 <
sort vector-or-list <
sort! vector-or-list <
Richard O'Keefe's stable list merge sort is right idea, but implemented
using gratuitous variable side effects. It also does redundant SET-CDR!s.
The vector sort converts to list, merge sorts, then reconverts
to vector. This is a bad idea -- non-local pointer chasing bad; vector
shuffling good.
MIT Scheme
sort! vector <
merge-sort! vector <
quick-sort! vector <
sort vector-or-list <
merge-sort vector-or-list <
quick-sort vector-or-list <
Naive vector quicksort: loser, for worst-case performance reasons.
List sort by "list->vector; quicksort; vector->list," hence also loser.
A clever stable vector merge sort, albeit not very bummed.
Scheme 48 & T
sort-list list <
sort-list! list <
list-merge! list1 list2 <
Bob Nix's implementation of online merge-sort, written in the early 80's.
Conses unnecessary bookkeeping structure, which isn't necessary with a
proper recursive formulation. Also, does redundant SET-CDR!s. No vector
sort. Also, has a bug -- is claimed to be a stable sort, but isn't! To see
this, get the S48 code, and try
(define (my< x y) (< (quotient x 2) (quotient y 2)))
(list-merge! (list 0 2) (list 3) my<) ; -> (0 2 3)
(list-merge! (list 2) (list 0 3) my<) ; -> (0 3 2)
This could be fixed very easily, but it isn't worth it given the
other problems with the algorithm.
RScheme
vector-sort! vector <
sort collection <
Good basic implementation of vector heapsort, which has O(n lg n)
worst-case time. Code ugly, needs tuning. List sort by "list->vector;
sort; vector->list", which allocates unneeded temp storage. Nothing
for stable sorting.
MzScheme
Naive quicksort -- but not available for vector sorting, even
though it internally uses a vector. Nothing for stable sorting,
and naive quicksort has bad worst-case behaviour.
Bigloo, Scheme->C
Couldn't find anything -- but maybe I didn't search for the right
thing, since the Bigloo names are French. (I invite correction from
the Bigloo implementors.)
Gambit
sort-list list <
Nothing for vectors. Simple, slow, unstable merge sort for lists.
Elk
Another naive quicksort. Lists handled by converting to vector.
sort vector-or-list <
sort! vector-or-list <
Chez Scheme
merge < list1 list2
merge! < list1 list2
sort < list
sort! < list
These are stable. I have not seen the source code.
Common Lisp
sort sequence < [key]
stable-sort sequence < [key]
merge result-type sequence1 sequence2 < [key]
The sort procedures are allowed, but not required, to be destructive.
SML/NJ
sort: ('a*'a -> bool) -> 'a list -> 'a list
"Smooth applicative merge sort," which is stable.
There is also a highly bummed quicksort for vectors.
The right solution: Implement a full toolbox of carefully written standard sort
routines.
Having the source available for all of these above-cited Schemes made
life a lot easier writing this code. I appreciate the authors making their
source available under such open terms.
-------------------------------------------------------------------------------
* Design rules
--------------
** What vs. how
===============
There are two different interfaces: "what" (simple) & "how" (detailed).
- Simple: you specify semantics: datatype (list or vector),
mutability, and stability.
- Detailed: you specify the actual algorithm (quick, heap,
insert, merge). Different algorithms have different properties,
both semantic & pragmatic, so these exports are necessary.
It is necessarily the case that the specifications of these procedures
make statements about execution "pragmatics." For example, the sole
distinction between heap sort and quick sort -- both of which are
provided by this library -- is one of execution time, which is not a
"semantic" distinction. Similar resource-use statements are made about
"iterative" procedures, meaning that they can execute on input of
arbitrary size without needing to allocate an unbounded number of stack
frames.
** Consistency across function signatures
=========================================
The two interfaces share common function signatures wherever
possible, to facilitate switching a given call from one procedure
to another.
** Data parameter first, less-than parameter after
==================================================
These procedures uniformly observe the following parameter order:
the data to be sorted come before the the comparison function.
That is, we write
(sort lis <)
not
(sort < lis).
This is consistent with every single implementation out there, with
the sole exception of Chez Scheme.
In my opinion, it would be more consistent with other Scheme libraries
to put the ordering function first -- the "operation currying" convention.
(E.g., consider FOR-EACH or MAP or FIND.) I decided to leave things as they
are in favor of near-total backwards compatibility with existing practice.
[Perhaps this should be discussed.]
** Ordering, comparison functions & stability
=============================================
These routines take a < comparison function, not a <= comparison
function, and they sort into increasing order. The difference between
a < spec and a <= spec comes up in two places:
- the definition of an ordered or sorted data set, and
- the definition of a stable sorting algorithm.
+ We say that a data set (a list or vector) is *sorted* or *ordered*
if it contains no adjacent pair of values ... X Y ... such that Y < X.
In other words, scanning across the data never takes a "downwards" step.
If you use a <= procedure where these algorithms expect a <
procedure, you may not get the answers you expect. For example,
the LIST-SORTED? function will return false if you pass it a <= comparison
function and an ordered list containing adjacent equal elements.
+ A "stable" sort is one that preserves the pre-existing order of equal
elements. Suppose, for example, that we sort a list of numbers by
comparing their absolute values, i.e., using comparison function
(lambda (x y) (< (abs x) (abs y)))
If we sort a list that contains both 3 and -3:
... 3 ... -3 ...
then a stable sort is an algorithm that will not swap the order
of these two elements, that is, the answer will look like
... 3 -3 ...
not
... -3 3 ...
Choosing < for the comparison function instead of <= affects how stability
is coded. Given an adjacent pair X Y, (< y x) means "Y should be moved in
front of X" -- otherwise, leave things as they are. So using a <= function
where a < function is expected will *invert* stability.
This is due to the definition of equality, given a < comparator:
(and (not (< x y))
(not (< y x)))
The definition is rather different, given a <= comparator:
(and (<= x y)
(<= x y))
+ A "stable" merge is one that reliably favors one of its data sets
when equal items appear in both data sets. *All merge operations in
this library are stable*, breaking ties between data sets in favor
of the first data set -- elements of the first list come before equal
elements in the second list.
So, if we are merging two lists of numbers ordered by absolute value
using the stable merge operation LIST-MERGE
(list-merge '(0 -2 4 8 -10) '(-1 3 -4 7)
(lambda (x y) (< (abs x) (abs y))))
reliably places the 4 of the first list before the equal-comparing -4
of the second list:
(0 -1 -2 4 -4 7 8 -10)
In short, if your comparison function F answers true to (F x x), then
using a stable sorting or merging algorithm will not give you a stable sort
or merge, and LIST-SORTED? may surprise you. Note that you can synthesize a <
function from a <= function with
(lambda (x y) (not (<= y x)))
if need be.
Precise definitions give sharp edges to tools, but require care
in use. "Measure twice, cut once."
I have adopted the choice of < from Common Lisp. I assume they
had a good reason for adopting < instead of <=. I'd love to know
what this reason is; send me email if you can explain it, please.
** All vector operations accept optional subrange parameters
============================================================
The vector operations specified below all take optional START/END arguments
indicating a selected subrange of a vector's elements. If a START parameter or
START/END parameter pair is given to such a procedure, they must be exact,
non-negative integers, such that
0 <= START <= END <= (VECTOR-LENGTH V)
where V is the related vector parameter. If not specified, they default to 0
and the length of the vector, respectively. They are interpreted to select the
range [START,END), that is, all elements from index START (inclusive) up to,
but not including, index END.
** Required vs. allowed side-effects
====================================
LIST-SORT! and LIST-STABLE-SORT! are allowed, but not required,
to alter their arguments' cons cells to construct the result list. This is
consistent with the what-not-how character of the group of procedures
to which they belong (the "sort-lib" package).
The LIST-DELETE-NEIGHBOR-DUPS!, LIST-MERGE! and LIST-MERGE-SORT! procedures,
on the other hand, provide specific algorithms, and, as such, explicitly
commit to the use of side-effects on their input lists in order to guarantee
their key algorithmic properties (e.g., linear-time operation, constant-space
stack use).
-------------------------------------------------------------------------------
* Procedure specification
-------------------------
The procedures are split into several packages. In a Scheme system that has a
module or package system, these procedures should be contained in modules
named as follows:
Package name Functionality
------------ -------------
sort-lib General sorting for lists & vectors
sorted?-lib Sorted predicates for lists & vectors
list-merge-sort-lib List merge sort
vector-merge-sort-lib Vector merge sort
vector-heap-sort-lib Vector heap sort
vector-quick-sort-lib Vector quick sort
vector-insert-sort-lib Vector insertion sort
delndup-lib List and vector delete neighbor duplicates
A Scheme system without a module system should provide all of the bindings
defined in all of these modules as components of the "SRFI-32" package.
Note that there is no list insert sort package, as you might as well always
use list merge sort. The reference implementation's destructive list merge
sort will do fewer SET-CDR!s than a destructive insert sort.
** Procedure naming and functionality
=====================================
Almost all of the procedures described below are variants of two basic
operations: sorting and merging. These procedures are consistently named
by composing a set of basic lexemes to indicate what they do.
Lexeme Meaning
------ -------
"sort" The procedure sorts its input data set by some < comparison function.
"merge" The procedure merges two ordered data sets into a single ordered
result.
"stable" This lexeme indicates that the sort is a stable one.
"vector" The procedure operates upon vectors.
"list" The procedure operates upon lists.
"!" Procedures that end in "!" are allowed, and sometimes required,
to reuse their input storage to construct their answer.
** Types of parameters and return values
========================================
In the procedures specified below,
- A LIS parameter is a list;
- A V parameter is a vector;
- A < or = parameter is a procedure accepting two arguments taken from the
specified procedure's data set(s), and returning a boolean;
- START and END parameters are exact, non-negative integers that
serve as vector indices selecting a subrange of some associated vector.
When specified, they must satisfy the relation
0 <= start <= end <= (vector-length v)
where V is the associated vector.
Passing values to procedures with these parameters that do not satisfy these
types is an error.
If a procedure is said to return "unspecified," this means that nothing at all
is said about what the procedure returns, not even the number of return
values. Such a procedure is not even required to be consistent from call to
call in the nature or number of its return values. It is simply required to
return a value (or values) that may be passed to a command continuation, e.g.
as the value of an expression appearing as a non-terminal subform of a BEGIN
expression. Note that in R5RS, this restricts such a procedure to returning a
single value; non-R5RS systems may not even provide this restriction.
** sort-lib - general sorting package
=====================================
This library provides basic sorting and merging functionality suitable for
general programming. The procedures are named by their semantic properties,
i.e., what they do to the data (sort, stable sort, merge, and so forth).
Procedure Suggested algorithm
-------------------------------------------------------------------------
list-sorted? lis < -> boolean
list-merge lis1 lis2 < -> list
list-merge! lis1 lis2 < -> list
list-sort lis < -> list (vector heap or quick)
list-sort! lis < -> list (list merge sort)
list-stable-sort lis < -> list (vector merge sort)
list-stable-sort! lis < -> list (list merge sort)
list-delete-neighbor-dups lis = -> list
list-delete-neighbor-dups! lis = -> list
vector-sorted? v < [start end] -> boolean
vector-merge v1 v2 < [start1 end1 start2 end2] -> vector
vector-merge! v v1 v2 < [start start1 end1 start2 end2] -> unspecific
vector-sort v < [start end] -> vector (heap or quick sort)
vector-sort! v < [start end] -> unspecific (heap or quick sort)
vector-stable-sort v < [start end] -> vector (vector merge sort)
vector-stable-sort! v < [start end] -> unspecific (vector merge sort)
vector-delete-neighbor-dups v = [start end] -> vector
vector-delete-neighbor-dups! v = [start end] -> end'
LIST-SORTED? and VECTOR-SORTED? return true if their input list or vector
is in sorted order, as determined by their < comparison parameter.
All four merge operations are stable: an element of the initial list LIS1
or vector V1 will come before an equal-comparing element in the second
list LIS2 or vector V2 in the result.
The procedures
LIST-MERGE
LIST-SORT
LIST-STABLE-SORT
LIST-DELETE-NEIGHBOR-DUPS
do not alter their inputs and are allowed to return a value that shares
a common tail with a list argument.
The procedures
LIST-SORT!
LIST-STABLE-SORT!
are "linear update" operators -- they are allowed, but not required, to
alter the cons cells of their arguments to produce their results.
On the other hand, the procedures
LIST-DELETE-NEIGHBOR-DUPS!
LIST-MERGE!
make only a single, iterative, linear-time pass over their argument lists,
using SET-CDR!s to rearrange the cells of the lists into the final result
-- they work "in place." Hence, any cons cell appearing in the result must
have originally appeared in an input. The intent of this
iterative-algorithm commitment is to allow the programmer to be sure that
if, for example, LIST-MERGE! is asked to merge two ten-million-element
lists, the operation will complete without performing some extremely
(possibly twenty-million) deep recursion.
The vector procedures
VECTOR-SORT
VECTOR-STABLE-SORT
VECTOR-DELETE-NEIGHBOR-DUPS
do not alter their inputs, but allocate a fresh vector for their result,
of length END-START.
The vector procedures
VECTOR-SORT!
VECTOR-STABLE-SORT!
sort their data in-place. (But note that VECTOR-STABLE-SORT! may
allocate temporary storage proportional to the size of the input --
I am not aware of O(n lg n) stable vector sorting algorithms that
run in constant space.)
VECTOR-MERGE returns a vector of length (END1-START1)+(END2-START2).
VECTOR-MERGE! writes its result into vector V, beginning at index START0,
for indices less than END0 = START0 + (END1-START1) + (END2-START2). The
target subvector
V[start0,end0)
may not overlap either source subvector
V1[start1,end1)
V2[start2,end2).
The DELETE-NEIGHBOR-DUP-... procedures:
These procedures delete adjacent duplicate elements from a list or a
vector, using a given element-equality procedure. The first/leftmost
element of a run of equal elements is the one that survives. The list or
vector is not otherwise disordered.
These procedures are linear time -- much faster than the O(n^2) general
duplicate-element deletors that do not assume any "bunching" of elements
(such as the ones provided by SRFI-1). If you want to delete duplicate
elements from a large list or vector, sort the elements to bring equal
items together, then use one of these procedures, for a total time of
O(n lg n).
The comparison function = passed to these procedures is always applied
(= x y)
where X comes before Y in the containing list or vector.
- LIST-DELETE-NEIGHBOR-DUPS does not alter its input list; its answer
may share storage with the input list.
- VECTOR-DELETE-NEIGHBOR-DUPS does not alter its input vector, but
rather allocates a fresh vector to hold the result.
- LIST-DELETE-NEIGHBOR-DUPS! is permitted, but not required, to
mutate its input list in order to construct its answer.
- VECTOR-DELETE-NEIGHBOR-DUPS! reuses its input vector to hold the
answer, packing its answer into the index range [start,end'), where
END' is the non-negative exact integer returned as its value. It
returns END' as its result. The vector is not altered outside the range
[start,end').
[Maybe this procedure should take a "target" vector to write?]
- Examples:
(list-delete-neighbor-dups '(1 1 2 7 7 7 0 -2 -2) =)
=> (1 2 7 0 -2)
(vector-delete-neighbor-dups '#(1 1 2 7 7 7 0 -2 -2) =)
=> #(1 2 7 0 -2)
(vector-delete-neighbor-dups '#(1 1 2 7 7 7 0 -2 -2) = 3 7)
=> #(7 0 -2)
;; Result left in v[3,9):
(let ((v (vector 0 0 0 1 1 2 2 3 3 4 4 5 5 6 6)))
(cons (vector-delete-neighbor-dups! v = 3)
v))
=> (9 . #(0 0 0 1 2 3 4 5 6 4 4 5 5 6 6))
** Algorithm-specific sorting packages
======================================
These packages provide more specific sorting functionality, that is,
specific committment to particular algorithms that have particular
pragmatic consequences (such as memory locality, asymptotic running time)
beyond their semantic behaviour (sorting, stable sorting, merging, etc.).
Programmers that need a particular algorithm can use one of these packages.
sorted?-lib - sorted predicates
list-sorted? lis < -> boolean
vector-sorted? v < [start end] -> boolean
Return #f iff there is an adjacent pair ... X Y ... in the input
list or vector such that Y < X. The optional START/END range
arguments restrict VECTOR-SORTED? to the indicated subvector.
list-merge-sort-lib - list merge sort
list-merge-sort lis < -> list
list-merge-sort! lis < -> list
list-merge lis1 lis2 < -> list
list-merge! lis1 lis2 < -> list
The sort procedures sort their data using a list merge sort, which is
stable. (The reference implementation is, additionally, a "natural" sort.
See below for the properties of this algorithm.)
The ! procedures are destructive -- they use SET-CDR!s to rearrange the
cells of the lists into the proper order. As such, they do not allocate
any extra cons cells -- they are "in place" sorts. Additionally,
LIST-MERGE! is iterative, not recursive -- it can operate on arguments of
arbitrary size without requiring an unbounded amount of stack space.
The merge operations are stable: an element of LIS1 will come before an
equal-comparing element in LIS2 in the result list.
vector-merge-sort-lib - vector merge sort
vector-merge-sort v < [start end temp] -> vector
vector-merge-sort! v < [start end temp] -> unspecific
vector-merge v1 v2 < [start1 end1 start2 end2] -> vector
vector-merge! v v1 v2 < [start0 start1 end1 start2 end2] -> unspecific
The sort procedures sort their data using vector merge sort, which is
stable. (The reference implementation is, additionally, a "natural" sort.
See below for the properties of this algorithm.)
The optional START/END arguments provide for sorting of subranges, and
default to 0 and the length of the corresponding vector.
Merge-sorting a vector requires the allocation of a temporary "scratch"
work vector for the duration of the sort. This scratch vector can be
passed in by the client as the optional TEMP argument; if so, the supplied
vector must be of size >= END, and will not be altered outside the range
[start,end). If not supplied, the sort routines allocate one themselves.
The merge operations are stable: an element of V1 will come before an
equal-comparing element in V2 in the result vector.
VECTOR-MERGE-SORT! leaves its result in V[start,end).
VECTOR-MERGE-SORT returns a vector of length END-START.
VECTOR-MERGE returns a vector of length (END1-START1)+(END2-START2).
VECTOR-MERGE! writes its result into vector V, beginning at index START0,
for indices less than END0 = START0 + (END1-START1) + (END2-START2). The
target subvector
V[start0,end0)
may not overlap either source subvector
V1[start1,end1)
V2[start2,end2).
vector-heap-sort-lib - vector heap sort
heap-sort v < [start end] -> vector
heap-sort! v < [start end] -> unspecific
These procedures sort their data using heap sort,
which is not a stable sorting algorithm.
HEAP-SORT returns a vector of length END-START.
HEAP-SORT! is in-place, leaving its result in V[start,end).
vector-quick-sort-lib - vector quick sort
quick-sort v < [start end] -> vector
quick-sort! v < [start end] -> unspecific
These procedures sort their data using quick sort,
which is not a stable sorting algorithm.
QUICK-SORT returns a vector of length END-START.
QUICK-SORT! is in-place, leaving its result in V[start,end).
vector-insert-sort-lib - vector insertion sort
insert-sort v < [start end] -> vector
insert-sort! v < [start end] -> unspecific
These procedures stably sort their data using insertion sort.
INSERT-SORT returns a vector of length END-START.
INSERT-SORT! is in-place, leaving its result in V[start,end).
delndup-lib - list and vector delete neighbor duplicates
list-delete-neighbor-dups lis = -> list
list-delete-neighbor-dups! lis = -> list
vector-delete-neighbor-dups v = [start end] -> vector
vector-delete-neighbor-dups! v = [start end] -> end'
These procedures delete adjacent duplicate elements from a list or
a vector, using a given element-equality procedure =. The first/leftmost
element of a run of equal elements is the one that survives. The list
or vector is not otherwise disordered.
These procedures are linear time -- much faster than the O(n^2) general
duplicate-element deletors that do not assume any "bunching" of elements
(such as the ones provided by SRFI-1). If you want to delete duplicate
elements from a large list or vector, sort the elements to bring equal
items together, then use one of these procedures, for a total time of
O(n lg n).
The comparison function = passed to these procedures is always applied
(= x y)
where X comes before Y in the containing list or vector.
LIST-DELETE-NEIGHBOR-DUPS does not alter its input list; its answer
may share storage with the input list.
VECTOR-DELETE-NEIGHBOR-DUPS does not alter its input vector, but
rather allocates a fresh vector to hold the result.
LIST-DELETE-NEIGHBOR-DUPS! is permitted, but not required, to
mutate its input list in order to construct its answer.
VECTOR-DELETE-NEIGHBOR-DUPS! reuses its input vector to hold the
answer, packing its answer into the index range [start,end'), where
END' is the non-negative exact integer returned as its value. It
returns END' as its result. The vector is not altered outside the range
[start,end').
Examples:
(list-delete-neighbor-dups '(1 1 2 7 7 7 0 -2 -2) =)
=> (1 2 7 0 -2)
(vector-delete-neighbor-dups '#(1 1 2 7 7 7 0 -2 -2) =)
=> #(1 2 7 0 -2)
(vector-delete-neighbor-dups '#(1 1 2 7 7 7 0 -2 -2) = 3 7)
=> #(7 0 -2)
;; Result left in v[3,9):
(let ((v (vector 0 0 0 1 1 2 2 3 3 4 4 5 5 6 6)))
(cons (vector-delete-neighbor-dups! v = 3)
v))
=> (9 . #(0 0 0 1 2 3 4 5 6 4 4 5 5 6 6))
-------------------------------------------------------------------------------
* Algorithmic properties
------------------------
Different sort and merge algorithms have different properties.
Choose the algorithm that matches your needs:
Vector insert sort
Stable, but only suitable for small vectors -- O(n^2).
Vector quick sort
Not stable. Is fast on average -- O(n lg n) -- but has bad worst-case
behaviour. Has good memory locality for big vectors (unlike heap sort).
A clever pivot-picking trick (median of three samples) helps avoid
worst-case behaviour, but pathological cases can still blow up.
Vector heap sort
Not stable. Guaranteed fast -- O(n lg n) *worst* case. Poor locality
on large vectors. A very reliable workhorse.
Vector merge sort
Stable. Not in-place -- requires a temporary buffer of equal size.
Fast -- O(n lg n) -- and has good memory locality for large vectors.
The implementation of vector merge sort provided by this SRFI's reference
implementation is, additionally, a "natural" sort, meaning that it
exploits existing order in the input data, providing O(n) best case.
Destructive list merge sort
Stable, fast and in-place (i.e., allocates no new cons cells). "Fast"
means O(n lg n) worse-case, and substantially better if the data
is already mostly ordered, all the way down to linear time for
a completely-ordered input list (i.e., it is a "natural" sort).
Note that sorting lists involves chasing pointers through memory, which
can be a loser on modern machine architectures because of poor cache &
page locality. Pointer *writing*, which is what the SET-CDR!s of a
destructive list-sort algorithm do, is even worse, especially if your
Scheme has a generational GC -- the writes will thrash the write-barrier.
Sorting vectors has inherently better locality.
This SRFIs destructive list merge and merge sort implementations are
opportunistic -- they avoid redundant SET-CDR!s, and try to take long
already-ordered runs of list structure as-is when doing the merges.
Pure list merge sort
Stable and fast -- O(n lg n) worst-case, and possibly better, depending
upon the input list (see above).
Algorithm Stable? Worst case Average case In-place
------------------------------------------------------
V insert Yes O(n^2) O(n^2) Yes
V quick No O(n^2) O(n lg n) Yes
V heap No O(n lg n) O(n lg n) Yes
V merge Yes O(n lg n) O(n lg n) No
L merge Yes O(n lg n) O(n lg n) Either
-------------------------------------------------------------------------------
* Topics to be resolved during discussion phase
-----------------------------------------------
I particularly solicit comments about the following topics.
- Include VECTOR-BINARY-SEARCH ?
Should we include
(VECTOR-BINARY-SEARCH v key< elt->key key [start end])
in the SRFI? It sort of goes with sorting; it's exactly ten lines of code.
- Comparison function before or after the list/vector argument?
Should it be
(list-sort < lis)
or
(list-sort lis <)
There is overwhelming consistency among the implementations: data first,
< after. Only Chez does it differently.
I have done it in the backwards-compatible way. But I prefer the < first,
data after way.
-------------------------------------------------------------------------------
* Porting and optimisation
--------------------------
This package should be trivial to port. There are only four non-R4RS bits
in the code:
- Use of multiple-value return, with the R5RS VALUES procedure, and the
simple (RECEIVE (var ...) mv-exp body ...) multiple-value binding macro.
- A VECTOR-COPY procedure. This is a tiny little procedure:
(vector-copy v [start end])
- Use of the LET-OPTIONALS macro from scsh to parse and default optional
arguments to three routines. Again, easy to port the macro or rewrite
the code to parse, default, and error check the args by hand.
- Calls to an ERROR function for complaining about bad arguments.
This code is tightly bummed, as far as I can go in portable Scheme.
You could speed up the vector code a lot by error-checking the procedure
parameters and then shifting over to fixnum-specific arithmetic and
dangerous vector-indexing and vector-setting primitives. The comments
in the code indicate where the initial error checks would have to be
added. There are several (QUOTIENT N 2)'s that could be changed to a
fixnum right-shift, as well, in both the list and vector code. The code
is designed to enable this -- each file usually exports one or two "safe"
procedures that end up calling an internal "dangerous" primitive. The
little exported cover procedures are where you move the error checks.
This should provide *big* speedups. In fact, all the code bumming I've done
pretty much disappears in the noise unless you have a good compiler and also
can dump the vector-index checks and generic arithmetic -- so I've really just
set things up for you to exploit.
The optional-arg parsing, defaulting, and error checking is done with a
portable R4RS macro. But if your Scheme has a faster mechanism (e.g., Chez),
you should definitely port over to it. Note that argument defaulting and
error-checking are interleaved -- you don't have to error-check defaulted
START/END args to see if they are fixnums that are legal vector indices for
the corresponding vector, etc.
-------------------------------------------------------------------------------
* References & Links
--------------------
This document, in HTML:
http://srfi.schemers.org/srfi-32/srfi-32.html
[This link may not be valid while the SRFI is in draft form.]
This document, in simple text format:
http://srfi.schemers.org/srfi-32/srfi-32.txt
Archive of SRFI-32 discussion-list email:
http://srfi.schemers.org/srfi-32/mail-archive/maillist.html
SRFI web site:
http://srfi.schemers.org/
[CommonLisp]
Common Lisp: the Language
Guy L. Steele Jr. (editor).
Digital Press, Maynard, Mass., second edition 1990.
Available at http://www.elwood.com/alu/table/references.htm#cltl2
The Common Lisp "HyperSpec," produced by Kent Pitman, is essentially
the ANSI spec for Common Lisp:
http://www.xanalys.com/software_tools/reference/HyperSpec/
[R5RS]
Revised^5 Report on the Algorithmic Language Scheme,
R. Kelsey, W. Clinger, J. Rees (editors).
Higher-Order and Symbolic Computation, Vol. 11, No. 1, September, 1998.
and ACM SIGPLAN Notices, Vol. 33, No. 9, October, 1998.
Available at http://www.schemers.org/Documents/Standards/
-------------------------------------------------------------------------------
* Acknowledgements
------------------
I thank the authors of the open source I consulted when designing this
library, particularly Richard O'Keefe, Donovan Kolby and the MIT Scheme Team.
-------------------------------------------------------------------------------
* Copyright
-----------
** SRFI text
============
This document is copyright (C) Olin Shivers (1998, 1999).
All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
** Reference implementation
===========================
Short summary: no restrictions.
While I wrote all of this code myself, I read a lot of code before I began
writing. However, all such code is, itself, either open source or public
domain, rendering irrelevant any issue of "copyright taint."
The natural merge sorts (pure list, destructive list, and vector) are not only
my own code, but are implementations of an algorithm of my own devising. They
run in O(n lg n) worst case, O(n) best case, and require only a logarithmic
number of stack frames. And they are stable. And the destructive-list variant
allocates zero cons cells; it simply rearranges the cells of the input list.
Hence the reference implementation is
Copyright (c) 1998 by Olin Shivers.
and made available under the same copyright as the SRFI text (see above).